Atcon Plywood Inc.
143 St. Patrick's Dr.
Miramichi (New Brunswick)
E1V 2L3
Status: Closed
|
Fax: (506)627-1339 Office: (506)627-1320
Hide Quality Statement
VENEER - Minimum diameter: 9" (23 cm) inside the bark.
- Maximum diameter: 27" (68 cm) inside the bark.
- Minimum length: 8'6" (2.60 m), altough 8'7" and 8'8" is preferred.
- Maximum length: 8'9" (2.66m).
- Logs must be straight and sound, with butt sawn square.
- Centre rot up to one inch is acceptable.
- Branch knots up to 2.5" accepted, if cut flush with the log.
- Allowable sweep: 10% of top diameter.
- Producers have a choice of stacked scale or weight scale. Units of measure will be m3st for stacked scale and metric tonnes for weight scale.
- Two feet must be left between tiers for inspection purposes.
- Culled logs must be removed from the yard immediately or they will be disposed of.
- Up to 10% tamarack, 10% jack pine or 10% white pine accepted in loads of spruce and fir.
TREE-LENGTH POPLAR - Grade 1: Must contain at least one veneer-quality piece
- Grade 2: Does not contain any veneer-quality piece
- All knots must be cut flush with the stem
- Forks, crotched sections and split ends will not be accepted
- The tree length shall not have excessive sweeps or crooks, and the load shall be free of all limbs, mud, rocks, etc.
- Old wood will not be accepted
|